FUSION 2000 WM
 |
 |
 |
Wallmount Dimmer 12 x 3 kW
The Fusion 2000 WM is a professional dimmer for use in theatre and in the studio. It comprises 12 individually controllable channels, each of which can be loaded with 3000 watts of resistive or inductive load in continuous operation.
The load currents are controlled via phase angle. Complex interference suppression through LC filters (suppression coils) ensures trouble-free operation. The 12 channels are secured by line circuit breakers. The unit can be controlled either via a digital (DMX 512) or via an analogue (0 - 10V DC) control signal.
The steel housing comes as a 19“ / 12U high unit for rack or wall mount. All display indicators and operating elements are located on the front side of the unit. All cable connections are located at the bottom of the unit.
In addition, the following technical features ensure safe and reliable operation:
 |
Three independent mains / control sets (one per phase) |
|
Active phase-independent cooling (DC ventilating fan with two-stage, temperature-dependent rotation speed) |
|
Temperature indicator with protective disconnect |
|
Excess temperature display - - Fan cooled |
|
over voltage indicator with protective disconnect |
|
Mains fault indicator |
|
Under voltage operation up to 30% under rated voltage |
|
Soft start after switching on and restarting following protective disconnect |
|
Channel-specific LED indicators for fuse failure, load identification, and control input |
|
Further indicators via illuminated display |
|
Settings menu-driven via 1 encoder wheel and 4 cursor buttons |
|
Test function and output limiter for each channel |
|
Adjustable lamp preheat |
|
4 different dimmer curves can be set |
|
Channel patching (control addresses can be assigned freely to any dimmer channel) |
|
“Stand alone“ operation (without control desk; presets, i.e., memories, such as chaser sequences can be set) |
|
DMX-failure presets can be programmed |
|
Supply voltage for lighting control desk |
|
LED indicator for DMX control signal |
|
All input and outputs on terminals |
Dimensions:
|
Steel-plated case 483 mm (19“) x 530 mm (12U) x 132 mm (without mounting brackets) |
|
Weight appr. 20Kg |