Celco products

FUSION 2000

What has this Fusion 2000 for you...

	single, two or three phase operation when phase is missing
	temperature control
	high performance heat sink
	fan cooled with "low-noise" theatre-mode
	protection against over voltage
	softstart
	performance by up to 30% under voltage
	low voltage output for analog control desk
	DMX512 / analog control

	interference suppression
	resistive / non resistive loads
	menu-management via VF-Display
	rotary encoder with turbo-detection
	socapex outlets fitted as standard
	short-circuit protection
	mounted circuit breaker (MCB)
	convenient construction
	LED indicators: status / load check fuse failure per channel dmx / over temperature power on per phase over voltage

Menu features

	test option for each channel (0 – 100 %)
	preheat adjustable per channel (0 – 100 %)
	various dimming curves per channel: – proportional / non dimming / S-Curve – fluorescent with 40 % start pulse
	channel patch (to change or copy the DMX channel to any dimmer channel)
	internal storage for stand alone use: – 30 memories / cues (with snapshot option) – 3 sequence patterns with 30 steps per pattern – fade and hold-time separately adjustable
	scene setting if DMX failure: – all channels 0 % / all channels 100 % – hold the last input-signal / preset 1-30
	2 auxiliary DMX channels (ch13, ch14)

Technical data

	12 channel @ 3kW (16A)
	mains supply: 230/400V, 50/60Hz
	input: DMX512 (1990) / 0 – 10V
	housing: 19"(483mm) / 3U(133mm) / 340mm
	weight: 21.5 kg
	low voltage output: +20 V/500 mA
	analog sub-d 15pin connector
	DMX input/output XLR 5pin